Component Hardware/ Hinges / Detent/Torque/Damper Hinges

Product Image


Detent hinge with built-in damper as an option
Detent will hold lid in open/closed position without secondary support, and optional damper will provide soft closing

Screws not included
Operating angle: 100 degrees
(detent at both 0 and 100 degrees)
Detent holding force: 10.2 kgf-cm(8.8 lbs-in)
Damper torque range: 10.2 ~25.5 kgf-cm(9~22 lbs-in)

Note: formerly CSH-63 Series


Schematic Spec Sheet